Hybrid dimmable 100 Watt 24V LED driver operates perfectly with leading edge phase cut dimmers (referred also as Triac dimmers) and can be used to dimming 24 Volts LED strips, controlled by standard wall dimmer switch powered by 240V AC or 0/1-10 Volts dimming systems.
It can operate with load ranging from 5% to 100% and the dimming range will be from less then 3% to 100%.
Flicker-Free: Complies with IEEE1789 standards, high frequency exception level (PWM 3500Hz)
It is suggested to load this driver with at least 5 Watt (maximum 100W) and use standard leading edge (Triac) dimmer with wattage that can cover load requirements.
It is recommended to calculate for an additional 20% overhead.
The hybrid models work perfectly with any leading-edge dimmers.
If you have a dimmer switch in mind and are unsure about compatibility, please email us for assistance.
Input Voltage: 170~250V AC – (Dimmable)
Output Voltage: 24V DC (100W)
Loading range: 5% to 100%.
Dimming range: 3% to 100%.
Efficiency: >92%
IP Rating: IP67
Dimensions: (LxWxH): 224x65x21mm
Weight: 0.454g
5 Years Warranty
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.
Find the Perfect Match for Your Product!
Exploring accessories or related products for what you’re viewing? Tap on our “Related Products” tab for a selection of complementary items.
Got too many results? Use our “Refine By” filter to narrow down your choices with ease.
Don’t forget to check out the “Attachments” and “Product Specification” tabs for detailed information and additional options.
