Premium Series constant voltage LED drivers with high power factor & efficiency.
This is a highly specified switch mode power supply, using the best electronic components in the market.
Non-Dimmable LED Driver suitable for LED Strips with a total power consumption up to 150W.
It is recommended to calculate 20% more than the tape power consumption.
LED Driver 150W/24V
Input: 100~264V AC (50/60Hz)
Output: 24V / 6.25 Amps
Suitable for LED Strips
Rating: IP67 (Waterproof)
Power factor: >0.95
Efficiency: >90%
Ripple: <2%
Dimensions: (LxWxH): 172x37x20.6mm
Weight: 0.275kg
UKCA, SELV, CE & RoHS certified
Warranty offered for premium series of LED drivers is 5 Years
Note: LED strip dimming is possible if this driver is used in combination with an LED controller. In such a case the LED driver is not required to be dimmable and brightness control (dimming) is still possible through the LED controller.
For driving RGB or RGBW LED Strips, you will have to combine the Driver with an RGB-RGBW LED Controller.
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.
The table below shows the maximum LED strip length, which can be operated with this LED driver.
To consider the best performance for the power supply, 20% is deducted from the maximum strip length in the table below.
Looking for Related Products or Accessories?
Click the 'Related Products' tab below the product description to find compatible LED strips, drivers, and accessories. For technical data or installation guides, check out the 'Attachment' tab for available PDFs. To refine your search further, use our "REFINE BY" filter system available when browsing any product category.
