Touch sensitive wall mount RGBW PWM LED controller single zone, Glass interface(White colour)
This is a PWM dimmable wall mounting RGBW LED controller that can be used directly with any RGBW LED strip (12 or 24V) or other constant voltage LED product.
NOTE: This unit features a built-in controller, so there is no need to buy additional units (Built-in controller only exclusive to this single zone model).
LED strip lighting can be driven directly by the wall mount PWM touch controller, the output of the controller is 4 channels (RGBW) using constant voltage common anode connection with a maximum of 4A per channel. Suggested to be used with a load of no more than 3A per CH. If used with RGBW 14.4W LED strip can drive up to 20 meters.
It is a touch controller with a glass interface in white colour and can be mounted on a standard UK back box, dimensions of the controller are 86x86mm and the depth is 29.1mm
At the wall back box it is necessary to supply 24V DC from a switch mode power supply (LED driver). Power consumption of the LED driver should be at least 20% more than the LED strips total power consumption. For up to 20m of 14.4W/m RGBW LED strip 400W 24V LED driver will be ideal (14.4W x 20m x 1.2=345.6 Watt)
Looking for Related Products or Accessories?
Click the 'Related Products' tab below the product description to find compatible LED strips, drivers, and accessories. For technical data or installation guides, check out the 'Attachment' tab for available PDFs. To refine your search further, use our "REFINE BY" filter system available when browsing any product category.
