10 meters roll IP67 RGBW LED Strip (RGB+CW-6000K) 24V | 14.4W/m 3oz 12mm FCP (14mm total width with coating)
Our 12mm (FCP width) LED strips are powered by 3oz high copper flexible PCB, which makes it possible to maintain a cooler operating temperature despite very high brightness. This also ensures less voltage drop, which is useful for installations which require longer runs; up to 10m can be powered from one end only, without causing a noticeable reduction in brightness. Overall, 12mm results in a longer lifespan of the LED strip, with a consistently strong performance throughout.
14.4W/m – 24V DC – 10m roll – 60 LEDs/m – IP67 (waterproof) – 5-wire cable (15cm on each side of the strip roll).
This new design of RGBW LED strip integrates all 3 primary colours (Red/Green/Blue) + Warm White in a single RGBW LED chip. Due to this innovative design (quad 4 in 1 chip), the strip is brighter than conventional RGB + W strips, which have one chip for RGB and another one for white.
The RGBW LED strips are powered by high quality quad SMD5050 LED chips. The brightness of each chip is 20 lumens (typical value, check spectrum test file for individual model).
The power consumption is 14.4W per meter, which means an average of 3.6W per colour per meter.
Red LED channel: wavelength 625nm
Green LED channel: wavelength 525nm
Blue LED channel: wavelength 470nm
For more information on RGB readings, please see our Wavelength Article.
Excellent colour rendering (CRI) – all white LED chips reach a value of Ra >80.
The strip can be cut every 6 LEDs (10cm). FCP width of LED strip is 12mm (14mm with sleeve)
Fitted with an easy to install original 3M adhesive tape with excellent adhesion.
3-year warranty
Please do NOT connect more than 10 meters of a LED strip in series. A LED strip of more than 10 meters in length is overloaded due to the increased amount of current passing through, resulting in the damage of the PCB and the failure of the LED strip.
This strip must be connected to a constant voltage 24 Volts DC LED Driver.
