High CRI Ra >90 LED Strip Light - 60 LEDs/m - pure white 6000K- 7.2 Watt per meter - 5 meters roll - IP65
Waterproof to IP65, 24 Volts constant voltage warm white 6000K
High Bright LED Strip SMD2835 Chip, 60 LEDs/m, 7.2W per meter, 5 meters roll.
This is a high bright LED strip, powered by Epistar SMD2835 LED chips (720 lm per meter/7.2W/60 LEDs)
The width of this LED strip is 8.5mm, height 3mm and can be cut at every 6 LEDs (10cm)
3 Years Warranty
All our LED Strips are dimmable. Please select a suitable PWM LED dimmer/controller.
With IP65 silicone sleeve LED strips it is not possible to use the IP65 strip connectors. This is due to the connector’s concave design, which won’t clamp onto the strip when closed. As such, it is recommended to solder or use the equivalent IP00 connectors, such as the IP00 8mm Strip-to-Wire Connectors and the IP00 8mm Strip-to-Strip Connectors.
IP65 silicone Sleeve protective covering
A silicone sleeve is a protective covering that is often used for IP65 rated LED strips. IP65 stands for "Ingress Protection 65" and refers to the level of protection that the LED strip has against dust and water. The silicone sleeve provides an extra layer of protection for the LED strip, helping to prevent damage from moisture or dust.
The silicone sleeve is typically made from a flexible, heat-resistant material that is molded to fit around the LED strip. The sleeve helps to prevent water from penetrating the LED strip and can also help to dissipate heat generated by the LED lights. This helps to extend the lifespan of the LED strip and ensures that it continues to perform reliably even in challenging environments.
In summary, both silicone and PU can be used to protect LED strips rated for IP65, but silicone sleeve is often considered to be the superior choice due to its high level of flexibility, water resistance, heat dissipation, and durability.
Price is for a 5 meters roll (300 LEDs), non waterproof (IP65), 7.2W/m CRI Ra>90 LED strip white 6000K
Please note that the same 6000K warm white LED strip is available with a higher brightness with 14.4W per meter power consumption.
Selection of the LED driver depending on the maximum LED strip length
The table below shows the maximum LED strip length, which can be operated with a given LED driver.
To consider the performance drop, which occurs in the power supply cable and the efficiency of the LED Driver, 20% was deducted from the maximum strip length in the table below.
Note that LED strips dimming is possible if the driver is used in combination with an LED controller. In such case LED driver is not required to be dimmable and brightness control (dimming) is still possible through the LED controller.
For more information about the installation of LED Strips, you can download “Installation of LED Strips” from the attachments tab
Looking for Related Products or Accessories?
Discover compatible products and accessories by clicking the 'Related Products' tab at the top of this product description on desktop, or just after this section on mobile devices. For detailed specifications, the 'Product Specification' tab is also available at the top of this description, offering immediate access to important product details. If you need technical data or installation guides, the 'Attachments' tab is located in the same area. To refine your search within any product category, the "REFINE BY" filter system is positioned on the left side of the screen on desktops and at the top of the page on mobiles, ensuring a seamless browsing experience.
