A LED strip connector (strip to power) designed for 10mm wide IP00/IP20 non-waterproof tunable white or pixel digital LED strips
Assemble wires by yourself as needed, flexible to different project, DIY customised length of wiring!
With this revolutionary LED strip to power connector you can customize required length of the cable, gauge, insulation colour and wire core type (stranded or solid) and use wires of your preference per project requirements.
This is a very high quality strip to wire (power) connector suitable only for IP00/IP20 10mm wide dynamic white or pixel individually addressable digital LED strips.
Compatible with 30-120 LEDs/m LED strips (10mm wide 3 pin). This connector is made of flame retardant material.
Supports high current LED strips!
Please note that this connector is not compatible with the gel coated (PU) IP54/65/67/68 LED strips.
Note: Please DO NOT close caps of the connector before strip to be in place as it is hard to open!
Technical Data
Size: L27mm X W14.6mm X H7.7mm
Colour: Transparent with black base
Number of Pin: 3
Pin Pitch: 2.9mm
Cross Sectional Area for wire (not included): 0.34 - 0.50mm²
Wire type AWG: 22-20#
Workable Wire OD: Max. 2.1mm
Applicable wire type: Solid wire / Stranded wire
Connection hardware: High precision brass(Cu)
Voltage range: 3-24V
Maximum current: 5A
Normal working temperature: ≦60°C
Working Temperature: -20°~+40°C
Rated Standard: IEC/EN 60664-1
Shell material: Polycarbonate
Flame Retardant: UL94v-0
Pin Surface Treatment: Tin-plating
